How RUBS works
The owner pays the utility, divides the total among units using a formula, and bills each household.1 MRI Software, a property software vendor, gives examples that divide by square footage for electricity, by occupants for water, and evenly for shared spaces. Other factors include bedrooms, bathrooms and water fixtures.1
| Method | Calculation | Example | Note |
|---|---|---|---|
| Square footage | Bill ÷ total SF × unit SF | $2,000 ÷ 40,000 SF = $0.05/SF | Simple, unrelated to people |
| Occupants | Bill ÷ total occupants × household | $2,000 ÷ 80 occupants = $25 each | Requires accurate occupant data |
| Equal shares | Bill ÷ units | $1,000 across 40 units = $25 | Simple, can feel unfair |
| Combined | A blend of factors | Varies | Fairer, but harder to explain |
Example: the NOI math
| Item | Calculation | Amount |
|---|---|---|
| Monthly water and sewer | 300 units | $12,000 |
| Less 10% for common areas | $12,000 × 90% | $10,800 |
| Per occupant | $10,800 ÷ 600 occupants | $18 a month |
| Annual recovery | $10,800 × 12 | $129,600 |
| Value at a 5.75% cap rate | $129,600 ÷ 5.75% | About $2.25M |
Read this carefully. Residents compare total housing cost, not only rent. A new charge can reduce the rent they'll pay or lift turnover, offsetting some of what you gain. Test your market before you add it to your underwriting.
The legal questions to ask
There's no single reliable national list of where RUBS is allowed, so check each location. Ask counsel:
- Is RUBS permitted for this utility, in this city and state?
- Must common-area costs be removed?
- Are there limits on what you can recover, or on any admin fees?
- What must the lease disclose, and how much notice is needed?
- Do fee transparency laws affect how you advertise rent?
Colorado shows how quickly this can change. Under HB 26-1013, signed in March 2026, existing properties may keep using RUBS if they meet conditions such as not billing above the utility's total charge, excluding common-area costs and disclosing the method in the lease. New residential premises applying for permits on or after July 1, 2027, must be metered directly or submetered.2
RUBS vs submetering
| RUBS | Submetering | |
|---|---|---|
| Basis for bill | A formula | Actual use |
| Upfront cost | Low | Higher, for meters and installation |
| Encourages conservation | Weakly, because it's shared | More strongly |
| Resident perception | Can feel arbitrary | Generally seen as fairer |
| Accuracy | An estimate | Metered, if well maintained |
Where the numbers and retrofit costs work, submetering may be more defensible, and some jurisdictions may push you toward it anyway.
Rolling it out well
- Get legal sign-off, and write the lease addendum.
- Choose a formula that's simple, and that you can explain.1
- Start at new leases and renewals, with clear advance notice.
- Check for leaks first, since passing on a wasteful bill creates complaints. See our opex guide.
- Audit billing against invoices, and track questions and complaints.
- Monitor renewals and collections after launch.
