A starting schedule
Use this as a checklist to compare against your contract. Manufacturer instructions, warranty terms and local codes take priority, and equipment type changes the details. For the rest of the building, see our preventive maintenance checklist.
| Frequency | Typical tasks |
|---|---|
| Monthly or quarterly | Change or check filters, check belts and drains, review alarms and setpoints |
| Before cooling season | Clean coils, check refrigerant readings and electrical connections, test economizers |
| Before heating season | Inspect burners and heat exchangers, test safeties, check combustion |
| Annually | Check dampers and sensors, review run schedules, update the equipment list |
| Every six months | Walk the building after hours, as ENERGY STAR suggests, to catch equipment left running2 |
What maintenance actually saves
Be careful with the numbers you see quoted. DOE's Federal Energy Management Program estimates that preventive maintenance saves 12% to 18% over reactive maintenance, based on unnamed studies. It's an estimate rather than a measured result.1
The popular claim that reactive maintenance costs three to five times as much doesn't appear in any edition of DOE's guide, according to a 2026 review. The guide's own figures per horsepower are $18 a year for reactive and $13 for preventive, or about 1.4 to 1.1 If a vendor promises five times the savings, ask for the data.
The stronger arguments are operational. A failure on the hottest day costs you an emergency call, and it can cost you a tenant's goodwill. Scheduled work can be planned, bid and supervised.
Choosing a service contract
| Contract type | What it covers | Watch for |
|---|---|---|
| Inspection only | Scheduled visits. Repairs quoted separately | Lowest price, but repair costs are unpredictable |
| Preventive maintenance | Visits, filters, belts and listed consumables | Exclusions, plus who approves repairs |
| Full coverage | Visits, plus parts and labor for listed failures | Costs more, and has exclusions on age and condition |
Whichever you choose, the contract should list every unit, attach a task list to each visit, and require a dated service record you can see. A monthly invoice isn't evidence that anything was done.
Who pays under the lease?
A lease can make the owner responsible for a rooftop unit while the tenant pays for it, or the reverse. Tenant-maintained units are a common blind spot, because nobody on the owner's side sees the service records. Require copies, or take on the contract and bill it back under the lease. Then check how the cost flows through your CAM reconciliation.
Repair or replace?
Keep a simple record for each unit: age, repair spend over the past 24 months, and comfort complaints. Then review it alongside your reserves.
| Unit | Age | 24-month repairs | Complaints | Call |
|---|---|---|---|---|
| RTU-1 | 6 years | $1,200 | 0 | Maintain |
| RTU-3 | 14 years | $11,500 | 6 | Budget replacement |
| RTU-5 | 19 years | $22,000 | 11 | Replace before peak season |
On the properties we manage, our AI flags equipment that drifts from its baseline, such as compressor runtime creeping up, so that a visit can be booked before the failure.
