Owners and asset managers: see where your portfolio's NOI is leaking. Schedule a free working session
Operations

How to reduce energy costs in commercial buildings, and actually keep the savings.

To reduce energy costs in a commercial building, benchmark use against similar buildings, then fix schedules, setpoints and maintenance before buying equipment. Upgrade only where payback holds. Space heating alone was 32% of U.S. commercial building energy in 2018. Check your leases early, because savings may pass to tenants rather than reaching NOI.

Updated November 6, 2026 · Opennova

Blue glass office tower beside a lower office building

Where the energy goes

EIA's most recent survey found space heating was the largest tracked end use, at 32% of commercial building energy. The share varies a lot by building type: service buildings used 52% for heating, while cooking took 40% in food service.1 Your own mix matters more than the national average, so start with your bills.

Start with no-cost and low-cost steps

ENERGY STAR's first rule is to run equipment only when needed. It calls leaving equipment and lights on the number one way to waste energy.2

  1. Benchmark. Enter 12 months of bills in ENERGY STAR Portfolio Manager. Some cities already require this.
  2. Match schedules to real occupancy. Adjust them when tenants leave or change hours.
  3. Walk the building after hours. ENERGY STAR suggests doing this every six months.2
  4. Tune setpoints seasonally. In DOE's modeling, setpoint changes were the largest single control measure, at about 8%.3
  5. Clear overrides on your building management system.
  6. Keep up maintenance. Dirty coils and stuck dampers waste energy. See HVAC maintenance.
  7. Read the utility bill. Check rate class, demand charges, meter errors and taxes.

Then consider capital projects

ProjectBest whenCheck first
LED lighting and controlsOlder fixtures, long operating hoursRebates, and who pays under the lease
HVAC replacementEquipment is near end of life anywayPrice the difference vs a standard unit
Controls upgradeCurrent controls are failing or missingWhether tuning alone would be enough
SubmeteringTenants have no reason to conserveLocal rules and lease rights
Envelope and windowsLeaks and comfort complaintsThese often have long paybacks

Who keeps the savings?

This is the question many energy proposals skip. Energy savings don't always reach the owner.

Lease typeWho benefits from lower energy costs
Gross or full serviceMostly the owner, who pays the bills
Base yearDepends on where costs sit against the base year. A lower base year can also change later recoveries
Triple netMostly the tenants, unless the lease lets you recover project costs
Directly metered apartmentsResidents. An owner's benefit is mainly in common areas

Check the capital expense clause before you commit. Many leases allow amortized recovery of cost-saving projects, but the conditions vary. For multifamily, see RUBS utility billing and its legal limits.

The NOI math

Illustrative. The cap rate is an assumption, and the savings figure comes from a study of analytics software
200,000 SF office, gross lease, illustrativeAmount
Annual savings, at the 20 cent per SF field median4$40,000
Added NOI, if the owner keeps all of it$40,000
Implied value at a 6% cap rateAbout $667,000

That's why energy deserves a place in an asset plan, provided the lease lets you keep the money. Test it with our NOI calculator and cap rate calculator.

Track it, or it drifts back

Savings fade when schedules get overridden and staff change. ENERGY STAR recommends tracking actual performance against expected performance over time.2 On the assets we manage, our AI watches for energy and utility anomalies as they happen, so an owner doesn't first learn of a spike from the month-end package.

Questions owners ask.

What uses the most energy in a commercial building?

Nationally, space heating was the largest tracked end use in EIA's 2018 survey, at 32%. It varies widely by climate and building type. Food service, for example, uses far more for cooking.

What is the cheapest way to cut energy use?

Operating changes usually come first: schedules, setpoints, overrides and maintenance. They need little capital, and they can make later equipment decisions clearer.

Do energy savings increase NOI?

Only if the owner keeps them. In a gross lease, they mostly do. In a triple net lease, much of the benefit goes to tenants unless the lease allows recovery of project costs.

How do I compare my building's energy use?

ENERGY STAR Portfolio Manager is a free benchmarking tool from the U.S. government. It's also what several city benchmarking rules use.

Sources

Checked November 6, 2026. Many industry figures come from vendors or trade groups, so we say who published each one. Test them against your own market.

  1. U.S. Energy Information Administration, commercial buildings and space heating. January 17, 2023, reporting the 2018 Commercial Buildings Energy Consumption Survey
  2. ENERGY STAR, operations and maintenance best practices. U.S. government program guidance
  3. U.S. Department of Energy, report on commercial building controls. September 20, 2017. Results are from computer simulation, not field measurement
  4. ACHR News, advanced building automation. Trade press summary of Berkeley Lab's 2017 Smart Energy Analytics study of 15 organizations and 400+ buildings. Secondary source

Keep reading.

See what your utility lines are telling you.

Tell us about the portfolio. We'll identify your highest-impact opportunities within 48 hours, then work through them with you.

Free · No obligation · Confidential
Schedule a working session