How the rules compare
| Jurisdiction | Who's covered, broadly | Key timing | Penalty, as reported |
|---|---|---|---|
| New York City, LL97 | Most buildings over 25,000 SF1 | Limits from 2024, stricter from 20301 | $268 per ton over the limit2 |
| Boston, BERDO | 35,000+ SF or 35+ units now3 | Limits from 2025, stricter by 20303 | $1,000 per day for 35,000+ SF2 |
| Washington, D.C., BEPS | Private buildings of 50,000+ SF, with smaller ones later4 | Cycle 1 ends Dec. 31, 20264 | Up to $10 per SF, capped at $7.5M per building4 |
| Seattle, BEPS | Varies by building type | Takes effect in 20312 | $2.50 to $10 per SF, by type2 |
| Denver | 25,000+ SF3 | 30% reduction by 20303 | May apply. Amount not stated in our source3 |
| Philadelphia | Non-residential, 50,000+ SF3 | Compliance from Sept. 30, 20273 | $2,000, plus $500 per day after 30 days3 |
| Washington State | Commercial, 50,000+ SF3 | June 2026 to 2028, by size3 | Administrative penalties3 |
| Maryland, Oregon, Cambridge | From 25,000 to 35,000+ SF, with differences3 | Varies3 | Check each program |
What the penalties look like
Simple examples show how quickly this reaches NOI:
- New York: 1,000 tons over the limit × $268 = $268,000 a year.2
- Boston: $1,000 a day comes to $365,000 over a full year, at the reported rate.2
- D.C.: at the maximum of $10 per SF, a 200,000 SF building could face up to $2 million. The amount drops as the building makes progress.4
The risk grows with each round. JLL, looking at three jurisdictions in 2024, estimated that about 14% of buildings faced penalties in the first round of limits, and that this would rise to 62% in the second.2
How to size your exposure
- List every asset by jurisdiction, including gross floor area and use type. Thresholds often apply differently to multifamily.
- Pull 12 to 24 months of utility data. Include tenant-paid meters where you can get them.
- Calculate today's result against current and future limits.
- Price the gap each year, and treat it as a recurring cost in your forecast.
- Price the fixes. Start with operating changes, then capital work timed to equipment replacement.
- Add it to your hold and sale plans. A buyer's advisers are likely to ask, and it may affect value.
Who pays: the lease question
The building owner is often the party responsible to the city, while tenants control much of the energy use. Review your leases to see whether penalties and compliance projects are recoverable, and whether you can get tenant meter data. New lease forms should address both. Your tax and condition reviews are natural moments to raise it.
Where we fit
We track compliance items and energy anomalies on the properties we manage. We don't act as your code consultant. Filings may need a registered design professional, as New York's do.1
